BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Narbil Training - ECPv6.17.3.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://www.narbiltraining.edu.au
X-WR-CALDESC:Events for Narbil Training
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:Australia/Brisbane
BEGIN:STANDARD
TZOFFSETFROM:+1000
TZOFFSETTO:+1000
TZNAME:AEST
DTSTART:20250101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261116T070000
DTEND;TZID=Australia/Brisbane:20261116T133000
DTSTAMP:20260831T130533Z
CREATED:20260812T180700Z
LAST-MODIFIED:20260831T130533Z
UID:791958-1794812400-1794835800@www.narbiltraining.edu.au
SUMMARY:HLTAID009 & UETDRMP018 CPR\, LVR
DESCRIPTION:
URL:https://www.narbiltraining.edu.au/event/hltaid009-uetdrmp018-cpr-lvr-13/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261116T070000
DTEND;TZID=Australia/Brisbane:20261118T150000
DTSTAMP:20260812T182145Z
CREATED:20260812T182145Z
LAST-MODIFIED:20260812T182145Z
UID:792085-1794812400-1795014000@www.narbiltraining.edu.au
SUMMARY:TLILIC0003 Licence to operate a Forklift truck
DESCRIPTION:The Forklift Truck High Risk Work Licence (TLILIC0003 - Licence to Operate a Forklift Truck) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to operate a forklift.\n\nA forklift truck is a powered industrial truck equipped with a mast and an elevating load carriage which has a pair of fork arms attached (that can be raised 900 mm or more above the ground) or other load holding attachment.\n\nFor information regarding the Identification requirements to attend the course please follow this link here
URL:https://www.narbiltraining.edu.au/event/tlilic0003-licence-to-operate-a-forklift-truck-2271/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261116T070000
DTEND;TZID=Australia/Brisbane:20261118T150000
DTSTAMP:20260812T182529Z
CREATED:20260812T182529Z
LAST-MODIFIED:20260812T182529Z
UID:792117-1794812400-1795014000@www.narbiltraining.edu.au
SUMMARY:TLILIC0005\, RIIHAN301E Elevated Work Platform Package
DESCRIPTION:This workshop describes the skills and knowledge required to operate an elevating work platform at any height.\n\nThis package includes the following units of competency:\n\nTLILIC0005 - Licence to Operate an Boom-Type Elevating Work Platform (Boom Length 11 meters or more)\n\nRIIHAN301E - Operate Elevating Work Platform\n\nThe EWP - Elevating Work Platform High Risk Work Licence (TLILIC0005 - Licence to operate a boom-type elevating work platform - boom length 11 metres or more) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to operate an Elevating Work Platform with a boom length of 11 metres or more.\n\nAn elevating work platform uses a telescoping device\, hinged device\, articulated device or any combination of these to raise personnel\, equipment or materials to perform work.
URL:https://www.narbiltraining.edu.au/event/tlilic0005-riihan301e-elevated-work-platform-package-8212/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261116T070000
DTEND;TZID=Australia/Brisbane:20261120T150000
DTSTAMP:20260812T181650Z
CREATED:20260812T181650Z
LAST-MODIFIED:20260812T181650Z
UID:792044-1794812400-1795186800@www.narbiltraining.edu.au
SUMMARY:CPCCLRG3002 Licence to perform Rigging Intermediate
DESCRIPTION:This unit (CPCCLRG3002 - Licence to Perform Rigging Intermediate Level) specifies the outcomes required to perform rigging work at the intermediate level\, which includes all the outcomes for rigging work at the basic level\, and also includes rigging of cranes\, rigging of conveyors\, rigging of dredges and excavators\, rigging associated with tilt slabs\, rigging associated with demolition work\, and dual lifts for licensing purposes.\n\nFor information regarding the Identification requirements to attend the course please follow this link here
URL:https://www.narbiltraining.edu.au/event/cpcclrg3002-licence-to-perform-rigging-intermediate-4598/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261116T070000
DTEND;TZID=Australia/Brisbane:20261120T150000
DTSTAMP:20260812T181954Z
CREATED:20260812T181954Z
LAST-MODIFIED:20260812T181954Z
UID:792061-1794812400-1795186800@www.narbiltraining.edu.au
SUMMARY:CPCCLDG3001 Licence to perform Dogging
DESCRIPTION:The Dogging High Risk Work Licence (CPCCLDG3001 - Licence to Perform Dogging) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to apply slinging techniques to a load or the directing of a crane operator in the movement of a load.\n\nFor information regarding the Identification requirements to attend the course please follow this link here
URL:https://www.narbiltraining.edu.au/event/cpccldg3001-licence-to-perform-dogging-370/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261117T070000
DTEND;TZID=Australia/Brisbane:20261117T133000
DTSTAMP:20260831T130532Z
CREATED:20260812T180659Z
LAST-MODIFIED:20260831T130532Z
UID:791957-1794898800-1794922200@www.narbiltraining.edu.au
SUMMARY:HLTAID009 & UETDRMP018 CPR\, LVR
DESCRIPTION:
URL:https://www.narbiltraining.edu.au/event/hltaid009-uetdrmp018-cpr-lvr-12/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261117T070000
DTEND;TZID=Australia/Brisbane:20261117T150000
DTSTAMP:20260831T130708Z
CREATED:20260812T181310Z
LAST-MODIFIED:20260831T130708Z
UID:792016-1794898800-1794927600@www.narbiltraining.edu.au
SUMMARY:Confined Space Package - RIIWHS202E\, MSMWHS217 & MSMPER200
DESCRIPTION:RIIWHS202E Enter and work in confined spaces\n	MSMPER200 Work in accordance with an issued permit\n	MSMWHS217 Gas test atmospheres\n\nThe Confined Space Certificate (RIIWHS202E Enter and Work in Confined Spaces) fulfills the training requirement for persons intending to enter and work in confined spaces.\n\nThe Permitting Certificate (MSMPER200 Work in Accordance with an Issued Permit) provides workers with the required knowledge and skills to meet site specific permit requirements.\n\nThe Gas Testing Certificate (MSMWHS217 Gas Test Atmospheres) aims to ensure workers are competent in the testing of the working atmosphere. This determines if it is safe for the proposed work to proceed. Testing involves the use of electronic test apparatus.\n\nFor information regarding the Identification requirements to attend the course please follow this link here\n\n\n\n 
URL:https://www.narbiltraining.edu.au/event/confined-space-package-riiwhs202e-msmwhs217-msmper200-18918/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261118T070000
DTEND;TZID=Australia/Brisbane:20261118T150000
DTSTAMP:20260812T182806Z
CREATED:20260812T182806Z
LAST-MODIFIED:20260812T182806Z
UID:792142-1794985200-1795014000@www.narbiltraining.edu.au
SUMMARY:First Aid Package - HLTAID009\, 010\, 011
DESCRIPTION:This unit (HLTAID011 - Provide First Aid) describes the skills and knowledge required to provide a first aid response to a casualty. \n\n \n\nThis unit (HLTAID009 - Provide cardiopulmonary resuscitation) describes the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) guidelines.\n\n \n\nThis unit (HLTAID010 - Provide basic emergency life support) describes the skills and knowledge required to recognise and respond to life-threatening emergencies in line with first aid guidelines determined by the Australian Resuscitation Council (ARC) and other Australian national peak clinical bodies.\n\n \n\nThese units apply to all workers who may be required to provide a first aid response in a range of situations\, including community and workplace settings.\n\n \n\nIt is recommended that First Aid refresher training be undertaken 3 yearly. \n\n \n\nUpon successful completion Narbil Training will issue 3 Statements of Attainment:\n\n• HLTAID011 - Provide First Aid\n\n• HLTAID009 - Provide Cardiopulmonary Resuscitation\n\n• HLTAID010 - Provide Basic Emergency Life Support\n\n \n\nNote: It is a requirement of this course that learners are physically capable of performing uninterrupted CPR for at least 2 minutes on a CPR manikin placed on the floor.
URL:https://www.narbiltraining.edu.au/event/first-aid-package-hltaid009-010-011-1120/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261118T070000
DTEND;TZID=Australia/Brisbane:20261120T150000
DTSTAMP:20260812T182142Z
CREATED:20260812T182142Z
LAST-MODIFIED:20260812T182142Z
UID:792084-1794985200-1795186800@www.narbiltraining.edu.au
SUMMARY:TLILIC0003 Licence to operate a Forklift truck
DESCRIPTION:The Forklift Truck High Risk Work Licence (TLILIC0003 - Licence to Operate a Forklift Truck) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to operate a forklift.\n\nA forklift truck is a powered industrial truck equipped with a mast and an elevating load carriage which has a pair of fork arms attached (that can be raised 900 mm or more above the ground) or other load holding attachment.\n\nFor information regarding the Identification requirements to attend the course please follow this link here
URL:https://www.narbiltraining.edu.au/event/tlilic0003-licence-to-operate-a-forklift-truck-2248/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261118T070000
DTEND;TZID=Australia/Brisbane:20261120T150000
DTSTAMP:20260812T182525Z
CREATED:20260812T182525Z
LAST-MODIFIED:20260812T182525Z
UID:792116-1794985200-1795186800@www.narbiltraining.edu.au
SUMMARY:TLILIC0005\, RIIHAN301E Elevated Work Platform Package
DESCRIPTION:This workshop describes the skills and knowledge required to operate an elevating work platform at any height.\n\nThis package includes the following units of competency:\n\nTLILIC0005 - Licence to Operate an Boom-Type Elevating Work Platform (Boom Length 11 meters or more)\n\nRIIHAN301E - Operate Elevating Work Platform\n\nThe EWP - Elevating Work Platform High Risk Work Licence (TLILIC0005 - Licence to operate a boom-type elevating work platform - boom length 11 metres or more) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to operate an Elevating Work Platform with a boom length of 11 metres or more.\n\nAn elevating work platform uses a telescoping device\, hinged device\, articulated device or any combination of these to raise personnel\, equipment or materials to perform work.
URL:https://www.narbiltraining.edu.au/event/tlilic0005-riihan301e-elevated-work-platform-package-8202/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261119T070000
DTEND;TZID=Australia/Brisbane:20261119T150000
DTSTAMP:20260812T183025Z
CREATED:20260812T183025Z
LAST-MODIFIED:20260812T183025Z
UID:792158-1795071600-1795100400@www.narbiltraining.edu.au
SUMMARY:RIIWHS204E Work safely at heights
DESCRIPTION:The Work at Heights Certificate (RIIWHS204E - Work safely at heights) fulfills the mandatory training requirement under Workplace Health and Safety Legislation for persons intending to carry out work at height; for example stacking shelves\, working on a roof\, unloading a large truck or accessing silos. Falls can also occur at ground level into holes; for example trenches or service pits.
URL:https://www.narbiltraining.edu.au/event/riiwhs204e-work-safely-at-heights-1299/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261120T070000
DTEND;TZID=Australia/Brisbane:20261120T150000
DTSTAMP:20260812T180847Z
CREATED:20260812T180847Z
LAST-MODIFIED:20260812T180847Z
UID:791983-1795158000-1795186800@www.narbiltraining.edu.au
SUMMARY:CPCWHS1001 Prepare to work safely in the construction industry
DESCRIPTION:The Queensland GCIT (White Card)\, CPCWHS1001 - Prepare to work safely in the construction industry is a mandatory requirement that provides new and existing workers with the basic understanding and knowledge needed to start or continue work within the building and construction industry.\n\n100 points of identification (ORIGINAL COPIES / CARDS ONLY) is required for this course.\n\nMinimum age is 13 years old.\n\nThe Queensland Construction Induction course is ONLY offered via FACE TO FACE delivery.
URL:https://www.narbiltraining.edu.au/event/cpcwhs1001-prepare-to-work-safely-in-the-construction-industry-2470/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261123T070000
DTEND;TZID=Australia/Brisbane:20261123T133000
DTSTAMP:20260831T130531Z
CREATED:20260812T180657Z
LAST-MODIFIED:20260831T130531Z
UID:791956-1795417200-1795440600@www.narbiltraining.edu.au
SUMMARY:HLTAID009 & UETDRMP018 CPR\, LVR
DESCRIPTION:
URL:https://www.narbiltraining.edu.au/event/hltaid009-uetdrmp018-cpr-lvr-11/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261123T070000
DTEND;TZID=Australia/Brisbane:20261123T150000
DTSTAMP:20260812T183023Z
CREATED:20260812T183023Z
LAST-MODIFIED:20260812T183023Z
UID:792157-1795417200-1795446000@www.narbiltraining.edu.au
SUMMARY:RIIWHS204E Work safely at heights
DESCRIPTION:The Work at Heights Certificate (RIIWHS204E - Work safely at heights) fulfills the mandatory training requirement under Workplace Health and Safety Legislation for persons intending to carry out work at height; for example stacking shelves\, working on a roof\, unloading a large truck or accessing silos. Falls can also occur at ground level into holes; for example trenches or service pits.
URL:https://www.narbiltraining.edu.au/event/riiwhs204e-work-safely-at-heights-1281/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261123T070000
DTEND;TZID=Australia/Brisbane:20261125T150000
DTSTAMP:20260812T182140Z
CREATED:20260812T182140Z
LAST-MODIFIED:20260812T182140Z
UID:792083-1795417200-1795618800@www.narbiltraining.edu.au
SUMMARY:TLILIC0003 Licence to operate a Forklift truck
DESCRIPTION:The Forklift Truck High Risk Work Licence (TLILIC0003 - Licence to Operate a Forklift Truck) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to operate a forklift.\n\nA forklift truck is a powered industrial truck equipped with a mast and an elevating load carriage which has a pair of fork arms attached (that can be raised 900 mm or more above the ground) or other load holding attachment.\n\nFor information regarding the Identification requirements to attend the course please follow this link here
URL:https://www.narbiltraining.edu.au/event/tlilic0003-licence-to-operate-a-forklift-truck-2224/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261123T070000
DTEND;TZID=Australia/Brisbane:20261125T150000
DTSTAMP:20260812T182521Z
CREATED:20260812T182521Z
LAST-MODIFIED:20260812T182521Z
UID:792115-1795417200-1795618800@www.narbiltraining.edu.au
SUMMARY:TLILIC0005\, RIIHAN301E Elevated Work Platform Package
DESCRIPTION:This workshop describes the skills and knowledge required to operate an elevating work platform at any height.\n\nThis package includes the following units of competency:\n\nTLILIC0005 - Licence to Operate an Boom-Type Elevating Work Platform (Boom Length 11 meters or more)\n\nRIIHAN301E - Operate Elevating Work Platform\n\nThe EWP - Elevating Work Platform High Risk Work Licence (TLILIC0005 - Licence to operate a boom-type elevating work platform - boom length 11 metres or more) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to operate an Elevating Work Platform with a boom length of 11 metres or more.\n\nAn elevating work platform uses a telescoping device\, hinged device\, articulated device or any combination of these to raise personnel\, equipment or materials to perform work.
URL:https://www.narbiltraining.edu.au/event/tlilic0005-riihan301e-elevated-work-platform-package-8192/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261123T070000
DTEND;TZID=Australia/Brisbane:20261127T150000
DTSTAMP:20260831T130847Z
CREATED:20260812T181643Z
LAST-MODIFIED:20260831T130847Z
UID:792040-1795417200-1795791600@www.narbiltraining.edu.au
SUMMARY:Health & Safety Representative - Initial 5 day
DESCRIPTION:For information regarding the Identification requirements to attend the course please follow this link here
URL:https://www.narbiltraining.edu.au/event/health-safety-representative-initial-5-day/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261123T070000
DTEND;TZID=Australia/Brisbane:20261127T150000
DTSTAMP:20260812T181929Z
CREATED:20260812T181929Z
LAST-MODIFIED:20260812T181929Z
UID:792048-1795417200-1795791600@www.narbiltraining.edu.au
SUMMARY:TLILIC0023 Licence to operate a Slewing mobile Crane (up to 60 tonnes)
DESCRIPTION:The 60 Tonne Slew Crane High Risk Work Licence (TLILIC0023- Licence to operate a slewing mobile crane (up to 60 tonnes) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to operate a slewing mobile crane with a capacity of up to 60 tonnes.\n\nNote: This licence also includes the authority for the operation of:\n\n	C2 - Slewing Mobile Crane up to 20T\n	CN - Non-Slewing Mobile Crane\n	CV - Vehicle Loading Crane\n	RS - Reach Stacker\n\nFor information regarding the Identification requirements to attend the course please follow this link here
URL:https://www.narbiltraining.edu.au/event/tlilic0023-licence-to-operate-a-slewing-mobile-crane-up-to-60-tonnes-753/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261123T070000
DTEND;TZID=Australia/Brisbane:20261127T150000
DTSTAMP:20260812T181952Z
CREATED:20260812T181952Z
LAST-MODIFIED:20260812T181952Z
UID:792060-1795417200-1795791600@www.narbiltraining.edu.au
SUMMARY:CPCCLDG3001 Licence to perform Dogging
DESCRIPTION:The Dogging High Risk Work Licence (CPCCLDG3001 - Licence to Perform Dogging) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to apply slinging techniques to a load or the directing of a crane operator in the movement of a load.\n\nFor information regarding the Identification requirements to attend the course please follow this link here
URL:https://www.narbiltraining.edu.au/event/cpccldg3001-licence-to-perform-dogging-361/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261124T070000
DTEND;TZID=Australia/Brisbane:20261124T133000
DTSTAMP:20260831T130530Z
CREATED:20260812T180656Z
LAST-MODIFIED:20260831T130530Z
UID:791955-1795503600-1795527000@www.narbiltraining.edu.au
SUMMARY:HLTAID009 & UETDRMP018 CPR\, LVR
DESCRIPTION:
URL:https://www.narbiltraining.edu.au/event/hltaid009-uetdrmp018-cpr-lvr-10/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261124T070000
DTEND;TZID=Australia/Brisbane:20261124T150000
DTSTAMP:20260831T130706Z
CREATED:20260812T181304Z
LAST-MODIFIED:20260831T130706Z
UID:792015-1795503600-1795532400@www.narbiltraining.edu.au
SUMMARY:Confined Space Package - RIIWHS202E\, MSMWHS217 & MSMPER200
DESCRIPTION:RIIWHS202E Enter and work in confined spaces\n	MSMPER200 Work in accordance with an issued permit\n	MSMWHS217 Gas test atmospheres\n\nThe Confined Space Certificate (RIIWHS202E Enter and Work in Confined Spaces) fulfills the training requirement for persons intending to enter and work in confined spaces.\n\nThe Permitting Certificate (MSMPER200 Work in Accordance with an Issued Permit) provides workers with the required knowledge and skills to meet site specific permit requirements.\n\nThe Gas Testing Certificate (MSMWHS217 Gas Test Atmospheres) aims to ensure workers are competent in the testing of the working atmosphere. This determines if it is safe for the proposed work to proceed. Testing involves the use of electronic test apparatus.\n\nFor information regarding the Identification requirements to attend the course please follow this link here\n\n\n\n 
URL:https://www.narbiltraining.edu.au/event/confined-space-package-riiwhs202e-msmwhs217-msmper200-18904/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261125T070000
DTEND;TZID=Australia/Brisbane:20261125T150000
DTSTAMP:20260812T182804Z
CREATED:20260812T182804Z
LAST-MODIFIED:20260812T182804Z
UID:792141-1795590000-1795618800@www.narbiltraining.edu.au
SUMMARY:First Aid Package - HLTAID009\, 010\, 011
DESCRIPTION:This unit (HLTAID011 - Provide First Aid) describes the skills and knowledge required to provide a first aid response to a casualty. \n\n \n\nThis unit (HLTAID009 - Provide cardiopulmonary resuscitation) describes the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) guidelines.\n\n \n\nThis unit (HLTAID010 - Provide basic emergency life support) describes the skills and knowledge required to recognise and respond to life-threatening emergencies in line with first aid guidelines determined by the Australian Resuscitation Council (ARC) and other Australian national peak clinical bodies.\n\n \n\nThese units apply to all workers who may be required to provide a first aid response in a range of situations\, including community and workplace settings.\n\n \n\nIt is recommended that First Aid refresher training be undertaken 3 yearly. \n\n \n\nUpon successful completion Narbil Training will issue 3 Statements of Attainment:\n\n• HLTAID011 - Provide First Aid\n\n• HLTAID009 - Provide Cardiopulmonary Resuscitation\n\n• HLTAID010 - Provide Basic Emergency Life Support\n\n \n\nNote: It is a requirement of this course that learners are physically capable of performing uninterrupted CPR for at least 2 minutes on a CPR manikin placed on the floor.
URL:https://www.narbiltraining.edu.au/event/first-aid-package-hltaid009-010-011-1116/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261125T070000
DTEND;TZID=Australia/Brisbane:20261127T150000
DTSTAMP:20260812T182137Z
CREATED:20260812T182137Z
LAST-MODIFIED:20260812T182137Z
UID:792082-1795590000-1795791600@www.narbiltraining.edu.au
SUMMARY:TLILIC0003 Licence to operate a Forklift truck
DESCRIPTION:The Forklift Truck High Risk Work Licence (TLILIC0003 - Licence to Operate a Forklift Truck) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to operate a forklift.\n\nA forklift truck is a powered industrial truck equipped with a mast and an elevating load carriage which has a pair of fork arms attached (that can be raised 900 mm or more above the ground) or other load holding attachment.\n\nFor information regarding the Identification requirements to attend the course please follow this link here
URL:https://www.narbiltraining.edu.au/event/tlilic0003-licence-to-operate-a-forklift-truck-2200/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261125T070000
DTEND;TZID=Australia/Brisbane:20261127T150000
DTSTAMP:20260812T182517Z
CREATED:20260812T182517Z
LAST-MODIFIED:20260812T182517Z
UID:792114-1795590000-1795791600@www.narbiltraining.edu.au
SUMMARY:TLILIC0005\, RIIHAN301E Elevated Work Platform Package
DESCRIPTION:This workshop describes the skills and knowledge required to operate an elevating work platform at any height.\n\nThis package includes the following units of competency:\n\nTLILIC0005 - Licence to Operate an Boom-Type Elevating Work Platform (Boom Length 11 meters or more)\n\nRIIHAN301E - Operate Elevating Work Platform\n\nThe EWP - Elevating Work Platform High Risk Work Licence (TLILIC0005 - Licence to operate a boom-type elevating work platform - boom length 11 metres or more) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to operate an Elevating Work Platform with a boom length of 11 metres or more.\n\nAn elevating work platform uses a telescoping device\, hinged device\, articulated device or any combination of these to raise personnel\, equipment or materials to perform work.
URL:https://www.narbiltraining.edu.au/event/tlilic0005-riihan301e-elevated-work-platform-package-8182/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261126T070000
DTEND;TZID=Australia/Brisbane:20261126T150000
DTSTAMP:20260812T180845Z
CREATED:20260812T180845Z
LAST-MODIFIED:20260812T180845Z
UID:791982-1795676400-1795705200@www.narbiltraining.edu.au
SUMMARY:CPCWHS1001 Prepare to work safely in the construction industry
DESCRIPTION:The Queensland GCIT (White Card)\, CPCWHS1001 - Prepare to work safely in the construction industry is a mandatory requirement that provides new and existing workers with the basic understanding and knowledge needed to start or continue work within the building and construction industry.\n\n100 points of identification (ORIGINAL COPIES / CARDS ONLY) is required for this course.\n\nMinimum age is 13 years old.\n\nThe Queensland Construction Induction course is ONLY offered via FACE TO FACE delivery.
URL:https://www.narbiltraining.edu.au/event/cpcwhs1001-prepare-to-work-safely-in-the-construction-industry-2447/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261126T070000
DTEND;TZID=Australia/Brisbane:20261126T150000
DTSTAMP:20260812T183021Z
CREATED:20260812T183021Z
LAST-MODIFIED:20260812T183021Z
UID:792156-1795676400-1795705200@www.narbiltraining.edu.au
SUMMARY:RIIWHS204E Work safely at heights
DESCRIPTION:The Work at Heights Certificate (RIIWHS204E - Work safely at heights) fulfills the mandatory training requirement under Workplace Health and Safety Legislation for persons intending to carry out work at height; for example stacking shelves\, working on a roof\, unloading a large truck or accessing silos. Falls can also occur at ground level into holes; for example trenches or service pits.
URL:https://www.narbiltraining.edu.au/event/riiwhs204e-work-safely-at-heights-1263/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261127T070000
DTEND;TZID=Australia/Brisbane:20261127T150000
DTSTAMP:20260812T180843Z
CREATED:20260812T180843Z
LAST-MODIFIED:20260812T180843Z
UID:791981-1795762800-1795791600@www.narbiltraining.edu.au
SUMMARY:CPCWHS1001 Prepare to work safely in the construction industry
DESCRIPTION:The Queensland GCIT (White Card)\, CPCWHS1001 - Prepare to work safely in the construction industry is a mandatory requirement that provides new and existing workers with the basic understanding and knowledge needed to start or continue work within the building and construction industry.\n\n100 points of identification (ORIGINAL COPIES / CARDS ONLY) is required for this course.\n\nMinimum age is 13 years old.\n\nThe Queensland Construction Induction course is ONLY offered via FACE TO FACE delivery.
URL:https://www.narbiltraining.edu.au/event/cpcwhs1001-prepare-to-work-safely-in-the-construction-industry-2424/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261130T070000
DTEND;TZID=Australia/Brisbane:20261130T133000
DTSTAMP:20260831T130529Z
CREATED:20260812T180655Z
LAST-MODIFIED:20260831T130529Z
UID:791954-1796022000-1796045400@www.narbiltraining.edu.au
SUMMARY:HLTAID009 & UETDRMP018 CPR\, LVR
DESCRIPTION:
URL:https://www.narbiltraining.edu.au/event/hltaid009-uetdrmp018-cpr-lvr-9/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261130T070000
DTEND;TZID=Australia/Brisbane:20261130T150000
DTSTAMP:20260812T183019Z
CREATED:20260812T183019Z
LAST-MODIFIED:20260812T183019Z
UID:792155-1796022000-1796050800@www.narbiltraining.edu.au
SUMMARY:RIIWHS204E Work safely at heights
DESCRIPTION:The Work at Heights Certificate (RIIWHS204E - Work safely at heights) fulfills the mandatory training requirement under Workplace Health and Safety Legislation for persons intending to carry out work at height; for example stacking shelves\, working on a roof\, unloading a large truck or accessing silos. Falls can also occur at ground level into holes; for example trenches or service pits.
URL:https://www.narbiltraining.edu.au/event/riiwhs204e-work-safely-at-heights-1245/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20261130T070000
DTEND;TZID=Australia/Brisbane:20261202T150000
DTSTAMP:20260812T182135Z
CREATED:20260812T182135Z
LAST-MODIFIED:20260812T182135Z
UID:792081-1796022000-1796223600@www.narbiltraining.edu.au
SUMMARY:TLILIC0003 Licence to operate a Forklift truck
DESCRIPTION:The Forklift Truck High Risk Work Licence (TLILIC0003 - Licence to Operate a Forklift Truck) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to operate a forklift.\n\nA forklift truck is a powered industrial truck equipped with a mast and an elevating load carriage which has a pair of fork arms attached (that can be raised 900 mm or more above the ground) or other load holding attachment.\n\nFor information regarding the Identification requirements to attend the course please follow this link here
URL:https://www.narbiltraining.edu.au/event/tlilic0003-licence-to-operate-a-forklift-truck-2176/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
END:VCALENDAR