BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Narbil Training - ECPv6.15.20//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://www.narbiltraining.edu.au
X-WR-CALDESC:Events for Narbil Training
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:Australia/Brisbane
BEGIN:STANDARD
TZOFFSETFROM:+1000
TZOFFSETTO:+1000
TZNAME:AEST
DTSTART:20250101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260811T070000
DTEND;TZID=Australia/Brisbane:20260813T150000
DTSTAMP:20260503T012402
CREATED:20251209T042601Z
LAST-MODIFIED:20251209T042601Z
UID:740867-1786431600-1786633200@www.narbiltraining.edu.au
SUMMARY:TLILIC0003 Licence to operate a Forklift truck
DESCRIPTION:The Forklift Truck High Risk Work Licence (TLILIC0003 - Licence to Operate a Forklift Truck) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to operate a forklift.\n\nA forklift truck is a powered industrial truck equipped with a mast and an elevating load carriage which has a pair of fork arms attached (that can be raised 900 mm or more above the ground) or other load holding attachment.\n\nFor information regarding the Identification requirements to attend the course please follow this link here
URL:https://www.narbiltraining.edu.au/event/tlilic0003-licence-to-operate-a-forklift-truck-2557/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260811T070000
DTEND;TZID=Australia/Brisbane:20260813T150000
DTSTAMP:20260503T012402
CREATED:20251209T042614Z
LAST-MODIFIED:20251209T042614Z
UID:740870-1786431600-1786633200@www.narbiltraining.edu.au
SUMMARY:TLILIC0005\, RIIHAN301E Elevated Work Platform Package
DESCRIPTION:This workshop describes the skills and knowledge required to operate an elevating work platform at any height.\n\nThis package includes the following units of competency:\n\nTLILIC0005 - Licence to Operate an Boom-Type Elevating Work Platform (Boom Length 11 meters or more)\n\nRIIHAN301E - Operate Elevating Work Platform\n\nThe EWP - Elevating Work Platform High Risk Work Licence (TLILIC0005 - Licence to operate a boom-type elevating work platform - boom length 11 metres or more) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to operate an Elevating Work Platform with a boom length of 11 metres or more.\n\nAn elevating work platform uses a telescoping device\, hinged device\, articulated device or any combination of these to raise personnel\, equipment or materials to perform work.
URL:https://www.narbiltraining.edu.au/event/tlilic0005-riihan301e-elevated-work-platform-package-8262/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260811T070000
DTEND;TZID=Australia/Brisbane:20260814T150000
DTSTAMP:20260503T012403
CREATED:20251209T042555Z
LAST-MODIFIED:20251209T042555Z
UID:740865-1786431600-1786719600@www.narbiltraining.edu.au
SUMMARY:CPCCLDG3001 Licence to perform Dogging
DESCRIPTION:The Dogging High Risk Work Licence (CPCCLDG3001 - Licence to Perform Dogging) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to apply slinging techniques to a load or the directing of a crane operator in the movement of a load.\n\nFor information regarding the Identification requirements to attend the course please follow this link here\n\n\nENROL NOW
URL:https://www.narbiltraining.edu.au/event/cpccldg3001-licence-to-perform-dogging-604/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260812T070000
DTEND;TZID=Australia/Brisbane:20260812T133000
DTSTAMP:20260503T012404
CREATED:20251209T040737Z
LAST-MODIFIED:20260502T150814Z
UID:740853-1786518000-1786541400@www.narbiltraining.edu.au
SUMMARY:HLTAID009 & UETDRMP018 CPR\, LVR
DESCRIPTION:
URL:https://www.narbiltraining.edu.au/event/hltaid009-uetdrmp018-cpr-lvr-11/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260812T070000
DTEND;TZID=Australia/Brisbane:20260812T150000
DTSTAMP:20260503T012405
CREATED:20251209T041548Z
LAST-MODIFIED:20260502T151103Z
UID:740860-1786518000-1786546800@www.narbiltraining.edu.au
SUMMARY:Confined Space Package - RIIWHS202E\, MSMWHS217 & MSMPER200
DESCRIPTION:RIIWHS202E Enter and work in confined spaces\n	MSMPER200 Work in accordance with an issued permit\n	MSMWHS217 Gas test atmospheres\n\nThe Confined Space Certificate (RIIWHS202E Enter and Work in Confined Spaces) fulfills the training requirement for persons intending to enter and work in confined spaces.\n\nThe Permitting Certificate (MSMPER200 Work in Accordance with an Issued Permit) provides workers with the required knowledge and skills to meet site specific permit requirements.\n\nThe Gas Testing Certificate (MSMWHS217 Gas Test Atmospheres) aims to ensure workers are competent in the testing of the working atmosphere. This determines if it is safe for the proposed work to proceed. Testing involves the use of electronic test apparatus.\n\nFor information regarding the Identification requirements to attend the course please follow this link here\n\n\n\n 
URL:https://www.narbiltraining.edu.au/event/confined-space-package-riiwhs202e-msmwhs217-msmper200-19324/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260814T070000
DTEND;TZID=Australia/Brisbane:20260814T150000
DTSTAMP:20260503T012406
CREATED:20251209T041528Z
LAST-MODIFIED:20251209T041528Z
UID:740857-1786690800-1786719600@www.narbiltraining.edu.au
SUMMARY:CPCWHS1001 Prepare to work safely in the construction industry
DESCRIPTION:The Queensland GCIT (White Card)\, CPCWHS1001 - Prepare to work safely in the construction industry is a mandatory requirement that provides new and existing workers with the basic understanding and knowledge needed to start or continue work within the building and construction industry.\n\n100 points of identification (ORIGINAL COPIES / CARDS ONLY) is required for this course.\n\nMinimum age is 13 years old.\n\nThe Queensland Construction Induction course is ONLY offered via FACE TO FACE delivery.
URL:https://www.narbiltraining.edu.au/event/cpcwhs1001-prepare-to-work-safely-in-the-construction-industry-3251/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260817T070000
DTEND;TZID=Australia/Brisbane:20260817T150000
DTSTAMP:20260503T012407
CREATED:20251209T051020Z
LAST-MODIFIED:20251209T051020Z
UID:740885-1786950000-1786978800@www.narbiltraining.edu.au
SUMMARY:CPCWHS1001 Prepare to work safely in the construction industry
DESCRIPTION:The Queensland GCIT (White Card)\, CPCWHS1001 - Prepare to work safely in the construction industry is a mandatory requirement that provides new and existing workers with the basic understanding and knowledge needed to start or continue work within the building and construction industry.\n\n100 points of identification (ORIGINAL COPIES / CARDS ONLY) is required for this course.\n\nMinimum age is 13 years old.\n\nThe Queensland Construction Induction course is ONLY offered via FACE TO FACE delivery.
URL:https://www.narbiltraining.edu.au/event/cpcwhs1001-prepare-to-work-safely-in-the-construction-industry-3434/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260817T070000
DTEND;TZID=Australia/Brisbane:20260817T150000
DTSTAMP:20260503T012407
CREATED:20251209T051857Z
LAST-MODIFIED:20251209T051857Z
UID:740910-1786950000-1786978800@www.narbiltraining.edu.au
SUMMARY:RIIWHS204E Work safely at heights
DESCRIPTION:The Work at Heights Certificate (RIIWHS204E - Work safely at heights) fulfills the mandatory training requirement under Workplace Health and Safety Legislation for persons intending to carry out work at height; for example stacking shelves\, working on a roof\, unloading a large truck or accessing silos. Falls can also occur at ground level into holes; for example trenches or service pits.
URL:https://www.narbiltraining.edu.au/event/riiwhs204e-work-safely-at-heights-2037/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260817T070000
DTEND;TZID=Australia/Brisbane:20260819T150000
DTSTAMP:20260503T012408
CREATED:20251209T051831Z
LAST-MODIFIED:20251209T051831Z
UID:740904-1786950000-1787151600@www.narbiltraining.edu.au
SUMMARY:TLILIC0003 Licence to operate a Forklift truck
DESCRIPTION:The Forklift Truck High Risk Work Licence (TLILIC0003 - Licence to Operate a Forklift Truck) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to operate a forklift.\n\nA forklift truck is a powered industrial truck equipped with a mast and an elevating load carriage which has a pair of fork arms attached (that can be raised 900 mm or more above the ground) or other load holding attachment.\n\nFor information regarding the Identification requirements to attend the course please follow this link here
URL:https://www.narbiltraining.edu.au/event/tlilic0003-licence-to-operate-a-forklift-truck-3348/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260817T070000
DTEND;TZID=Australia/Brisbane:20260819T150000
DTSTAMP:20260503T012409
CREATED:20251209T051842Z
LAST-MODIFIED:20251209T051842Z
UID:740906-1786950000-1787151600@www.narbiltraining.edu.au
SUMMARY:TLILIC0005\, RIIHAN301E Elevated Work Platform Package
DESCRIPTION:This workshop describes the skills and knowledge required to operate an elevating work platform at any height.\n\nThis package includes the following units of competency:\n\nTLILIC0005 - Licence to Operate an Boom-Type Elevating Work Platform (Boom Length 11 meters or more)\n\nRIIHAN301E - Operate Elevating Work Platform\n\nThe EWP - Elevating Work Platform High Risk Work Licence (TLILIC0005 - Licence to operate a boom-type elevating work platform - boom length 11 metres or more) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to operate an Elevating Work Platform with a boom length of 11 metres or more.\n\nAn elevating work platform uses a telescoping device\, hinged device\, articulated device or any combination of these to raise personnel\, equipment or materials to perform work.
URL:https://www.narbiltraining.edu.au/event/tlilic0005-riihan301e-elevated-work-platform-package-8480/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260817T070000
DTEND;TZID=Australia/Brisbane:20260821T150000
DTSTAMP:20260503T012410
CREATED:20251209T051622Z
LAST-MODIFIED:20260502T151234Z
UID:740893-1786950000-1787324400@www.narbiltraining.edu.au
SUMMARY:Health & Safety Representative - Initial 5 day
DESCRIPTION:For information regarding the Identification requirements to attend the course please follow this link here
URL:https://www.narbiltraining.edu.au/event/health-safety-representative-initial-5-day-4/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260817T070000
DTEND;TZID=Australia/Brisbane:20260821T150000
DTSTAMP:20260503T012411
CREATED:20251209T051809Z
LAST-MODIFIED:20251209T051809Z
UID:740898-1786950000-1787324400@www.narbiltraining.edu.au
SUMMARY:CPCCLRG3001 Licence to perform Basic Rigging
DESCRIPTION:The Basic Rigging High Risk Work Licence (CPCCLRG3001 - Licence to Perform Rigging Basic Level) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to conduct structural steel erection\, hoist erection\, placement of pre-cast concrete members of a structure\, erect safety nets & static lines\, assemble mast climbers\, place shutters & screens and cantilevered crane loading platforms (CCLPs).\n\nFor information regarding the Identification requirements to attend the course please follow this link here
URL:https://www.narbiltraining.edu.au/event/cpcclrg3001-licence-to-perform-basic-rigging-3513/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260817T070000
DTEND;TZID=Australia/Brisbane:20260821T150000
DTSTAMP:20260503T012412
CREATED:20251209T051815Z
LAST-MODIFIED:20251209T051815Z
UID:740900-1786950000-1787324400@www.narbiltraining.edu.au
SUMMARY:CPCCLDG3001 Licence to perform Dogging
DESCRIPTION:The Dogging High Risk Work Licence (CPCCLDG3001 - Licence to Perform Dogging) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to apply slinging techniques to a load or the directing of a crane operator in the movement of a load.\n\nFor information regarding the Identification requirements to attend the course please follow this link here\n\n\nENROL NOW
URL:https://www.narbiltraining.edu.au/event/cpccldg3001-licence-to-perform-dogging-631/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260818T070000
DTEND;TZID=Australia/Brisbane:20260818T150000
DTSTAMP:20260503T012413
CREATED:20251209T051051Z
LAST-MODIFIED:20260502T151102Z
UID:740889-1787036400-1787065200@www.narbiltraining.edu.au
SUMMARY:Confined Space Package - RIIWHS202E\, MSMWHS217 & MSMPER200
DESCRIPTION:RIIWHS202E Enter and work in confined spaces\n	MSMPER200 Work in accordance with an issued permit\n	MSMWHS217 Gas test atmospheres\n\nThe Confined Space Certificate (RIIWHS202E Enter and Work in Confined Spaces) fulfills the training requirement for persons intending to enter and work in confined spaces.\n\nThe Permitting Certificate (MSMPER200 Work in Accordance with an Issued Permit) provides workers with the required knowledge and skills to meet site specific permit requirements.\n\nThe Gas Testing Certificate (MSMWHS217 Gas Test Atmospheres) aims to ensure workers are competent in the testing of the working atmosphere. This determines if it is safe for the proposed work to proceed. Testing involves the use of electronic test apparatus.\n\nFor information regarding the Identification requirements to attend the course please follow this link here\n\n\n\n 
URL:https://www.narbiltraining.edu.au/event/confined-space-package-riiwhs202e-msmwhs217-msmper200-19366/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260819T070000
DTEND;TZID=Australia/Brisbane:20260821T150000
DTSTAMP:20260503T012413
CREATED:20251209T051826Z
LAST-MODIFIED:20251209T051826Z
UID:740903-1787122800-1787324400@www.narbiltraining.edu.au
SUMMARY:TLILIC0003 Licence to operate a Forklift truck
DESCRIPTION:The Forklift Truck High Risk Work Licence (TLILIC0003 - Licence to Operate a Forklift Truck) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to operate a forklift.\n\nA forklift truck is a powered industrial truck equipped with a mast and an elevating load carriage which has a pair of fork arms attached (that can be raised 900 mm or more above the ground) or other load holding attachment.\n\nFor information regarding the Identification requirements to attend the course please follow this link here
URL:https://www.narbiltraining.edu.au/event/tlilic0003-licence-to-operate-a-forklift-truck-3326/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260820T070000
DTEND;TZID=Australia/Brisbane:20260820T150000
DTSTAMP:20260503T012414
CREATED:20251209T051854Z
LAST-MODIFIED:20251209T051854Z
UID:740909-1787209200-1787238000@www.narbiltraining.edu.au
SUMMARY:RIIWHS204E Work safely at heights
DESCRIPTION:The Work at Heights Certificate (RIIWHS204E - Work safely at heights) fulfills the mandatory training requirement under Workplace Health and Safety Legislation for persons intending to carry out work at height; for example stacking shelves\, working on a roof\, unloading a large truck or accessing silos. Falls can also occur at ground level into holes; for example trenches or service pits.
URL:https://www.narbiltraining.edu.au/event/riiwhs204e-work-safely-at-heights-2019/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260824T070000
DTEND;TZID=Australia/Brisbane:20260824T133000
DTSTAMP:20260503T012415
CREATED:20251209T050631Z
LAST-MODIFIED:20260502T150813Z
UID:740878-1787554800-1787578200@www.narbiltraining.edu.au
SUMMARY:HLTAID009 & UETDRMP018 CPR\, LVR
DESCRIPTION:
URL:https://www.narbiltraining.edu.au/event/hltaid009-uetdrmp018-cpr-lvr-52/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260824T070000
DTEND;TZID=Australia/Brisbane:20260824T150000
DTSTAMP:20260503T012416
CREATED:20251209T051851Z
LAST-MODIFIED:20251209T051851Z
UID:740908-1787554800-1787583600@www.narbiltraining.edu.au
SUMMARY:RIIWHS204E Work safely at heights
DESCRIPTION:The Work at Heights Certificate (RIIWHS204E - Work safely at heights) fulfills the mandatory training requirement under Workplace Health and Safety Legislation for persons intending to carry out work at height; for example stacking shelves\, working on a roof\, unloading a large truck or accessing silos. Falls can also occur at ground level into holes; for example trenches or service pits.
URL:https://www.narbiltraining.edu.au/event/riiwhs204e-work-safely-at-heights-2001/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260824T070000
DTEND;TZID=Australia/Brisbane:20260826T150000
DTSTAMP:20260503T012417
CREATED:20251209T051822Z
LAST-MODIFIED:20251209T051822Z
UID:740902-1787554800-1787756400@www.narbiltraining.edu.au
SUMMARY:TLILIC0003 Licence to operate a Forklift truck
DESCRIPTION:The Forklift Truck High Risk Work Licence (TLILIC0003 - Licence to Operate a Forklift Truck) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to operate a forklift.\n\nA forklift truck is a powered industrial truck equipped with a mast and an elevating load carriage which has a pair of fork arms attached (that can be raised 900 mm or more above the ground) or other load holding attachment.\n\nFor information regarding the Identification requirements to attend the course please follow this link here
URL:https://www.narbiltraining.edu.au/event/tlilic0003-licence-to-operate-a-forklift-truck-3304/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260824T070000
DTEND;TZID=Australia/Brisbane:20260826T150000
DTSTAMP:20260503T012417
CREATED:20251209T051835Z
LAST-MODIFIED:20251209T051835Z
UID:740905-1787554800-1787756400@www.narbiltraining.edu.au
SUMMARY:TLILIC0005\, RIIHAN301E Elevated Work Platform Package
DESCRIPTION:This workshop describes the skills and knowledge required to operate an elevating work platform at any height.\n\nThis package includes the following units of competency:\n\nTLILIC0005 - Licence to Operate an Boom-Type Elevating Work Platform (Boom Length 11 meters or more)\n\nRIIHAN301E - Operate Elevating Work Platform\n\nThe EWP - Elevating Work Platform High Risk Work Licence (TLILIC0005 - Licence to operate a boom-type elevating work platform - boom length 11 metres or more) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to operate an Elevating Work Platform with a boom length of 11 metres or more.\n\nAn elevating work platform uses a telescoping device\, hinged device\, articulated device or any combination of these to raise personnel\, equipment or materials to perform work.
URL:https://www.narbiltraining.edu.au/event/tlilic0005-riihan301e-elevated-work-platform-package-8470/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260824T070000
DTEND;TZID=Australia/Brisbane:20260828T150000
DTSTAMP:20260503T012418
CREATED:20251209T051627Z
LAST-MODIFIED:20251209T051627Z
UID:740894-1787554800-1787929200@www.narbiltraining.edu.au
SUMMARY:CPCCLRG3002 Licence to perform Rigging Intermediate
DESCRIPTION:This unit (CPCCLRG3002 - Licence to Perform Rigging Intermediate Level) specifies the outcomes required to perform rigging work at the intermediate level\, which includes all the outcomes for rigging work at the basic level\, and also includes rigging of cranes\, rigging of conveyors\, rigging of dredges and excavators\, rigging associated with tilt slabs\, rigging associated with demolition work\, and dual lifts for licensing purposes.\n\nFor information regarding the Identification requirements to attend the course please follow this link here
URL:https://www.narbiltraining.edu.au/event/cpcclrg3002-licence-to-perform-rigging-intermediate-4605/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260824T070000
DTEND;TZID=Australia/Brisbane:20260828T150000
DTSTAMP:20260503T012419
CREATED:20251209T051812Z
LAST-MODIFIED:20251209T051812Z
UID:740899-1787554800-1787929200@www.narbiltraining.edu.au
SUMMARY:CPCCLDG3001 Licence to perform Dogging
DESCRIPTION:The Dogging High Risk Work Licence (CPCCLDG3001 - Licence to Perform Dogging) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to apply slinging techniques to a load or the directing of a crane operator in the movement of a load.\n\nFor information regarding the Identification requirements to attend the course please follow this link here\n\n\nENROL NOW
URL:https://www.narbiltraining.edu.au/event/cpccldg3001-licence-to-perform-dogging-622/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260825T070000
DTEND;TZID=Australia/Brisbane:20260825T150000
DTSTAMP:20260503T012420
CREATED:20251209T051038Z
LAST-MODIFIED:20260502T151101Z
UID:740888-1787641200-1787670000@www.narbiltraining.edu.au
SUMMARY:Confined Space Package - RIIWHS202E\, MSMWHS217 & MSMPER200
DESCRIPTION:RIIWHS202E Enter and work in confined spaces\n	MSMPER200 Work in accordance with an issued permit\n	MSMWHS217 Gas test atmospheres\n\nThe Confined Space Certificate (RIIWHS202E Enter and Work in Confined Spaces) fulfills the training requirement for persons intending to enter and work in confined spaces.\n\nThe Permitting Certificate (MSMPER200 Work in Accordance with an Issued Permit) provides workers with the required knowledge and skills to meet site specific permit requirements.\n\nThe Gas Testing Certificate (MSMWHS217 Gas Test Atmospheres) aims to ensure workers are competent in the testing of the working atmosphere. This determines if it is safe for the proposed work to proceed. Testing involves the use of electronic test apparatus.\n\nFor information regarding the Identification requirements to attend the course please follow this link here\n\n\n\n 
URL:https://www.narbiltraining.edu.au/event/confined-space-package-riiwhs202e-msmwhs217-msmper200-19352/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260826T070000
DTEND;TZID=Australia/Brisbane:20260828T150000
DTSTAMP:20260503T012421
CREATED:20251209T051817Z
LAST-MODIFIED:20251209T051817Z
UID:740901-1787727600-1787929200@www.narbiltraining.edu.au
SUMMARY:TLILIC0003 Licence to operate a Forklift truck
DESCRIPTION:The Forklift Truck High Risk Work Licence (TLILIC0003 - Licence to Operate a Forklift Truck) is a mandatory requirement under Workplace Health and Safety Legislation for persons intending to operate a forklift.\n\nA forklift truck is a powered industrial truck equipped with a mast and an elevating load carriage which has a pair of fork arms attached (that can be raised 900 mm or more above the ground) or other load holding attachment.\n\nFor information regarding the Identification requirements to attend the course please follow this link here
URL:https://www.narbiltraining.edu.au/event/tlilic0003-licence-to-operate-a-forklift-truck-3282/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260827T070000
DTEND;TZID=Australia/Brisbane:20260827T150000
DTSTAMP:20260503T012422
CREATED:20251209T051017Z
LAST-MODIFIED:20251209T051017Z
UID:740884-1787814000-1787842800@www.narbiltraining.edu.au
SUMMARY:CPCWHS1001 Prepare to work safely in the construction industry
DESCRIPTION:The Queensland GCIT (White Card)\, CPCWHS1001 - Prepare to work safely in the construction industry is a mandatory requirement that provides new and existing workers with the basic understanding and knowledge needed to start or continue work within the building and construction industry.\n\n100 points of identification (ORIGINAL COPIES / CARDS ONLY) is required for this course.\n\nMinimum age is 13 years old.\n\nThe Queensland Construction Induction course is ONLY offered via FACE TO FACE delivery.
URL:https://www.narbiltraining.edu.au/event/cpcwhs1001-prepare-to-work-safely-in-the-construction-industry-3412/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260827T070000
DTEND;TZID=Australia/Brisbane:20260827T150000
DTSTAMP:20260503T012423
CREATED:20251209T051026Z
LAST-MODIFIED:20260502T151100Z
UID:740887-1787814000-1787842800@www.narbiltraining.edu.au
SUMMARY:Confined Space Package - RIIWHS202E\, MSMWHS217 & MSMPER200
DESCRIPTION:RIIWHS202E Enter and work in confined spaces\n	MSMPER200 Work in accordance with an issued permit\n	MSMWHS217 Gas test atmospheres\n\nThe Confined Space Certificate (RIIWHS202E Enter and Work in Confined Spaces) fulfills the training requirement for persons intending to enter and work in confined spaces.\n\nThe Permitting Certificate (MSMPER200 Work in Accordance with an Issued Permit) provides workers with the required knowledge and skills to meet site specific permit requirements.\n\nThe Gas Testing Certificate (MSMWHS217 Gas Test Atmospheres) aims to ensure workers are competent in the testing of the working atmosphere. This determines if it is safe for the proposed work to proceed. Testing involves the use of electronic test apparatus.\n\nFor information regarding the Identification requirements to attend the course please follow this link here\n\n\n\n 
URL:https://www.narbiltraining.edu.au/event/confined-space-package-riiwhs202e-msmwhs217-msmper200-19351/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260828T070000
DTEND;TZID=Australia/Brisbane:20260828T110000
DTSTAMP:20260503T012423
CREATED:20251209T051024Z
LAST-MODIFIED:20251209T051024Z
UID:740886-1787900400-1787914800@www.narbiltraining.edu.au
SUMMARY:HLTAID009 Provide cardiopulmonary resuscitation
DESCRIPTION:This unit (HLTAID009 - Provide Cardiopulmonary Resuscitation) describes the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) Guidelines.\n\n \n\nThis unit applies to all workers who may be required to provide CPR\, in a range of situations\, including community and workplace settings.\n\n \n\nUpon successful completion Narbil Training will issue a Statement of Attainment for:\n\n \n\n• HLTAID009 - Provide Cardiopulmonary Resuscitation\n\n \n\nIt is recommended that CPR refresher training be undertaken yearly. \n\n \n\nNote: It is a requirement of this course that learners are physically capable of performing uninterrupted CPR for at least 2 minutes on a CPR manikin placed on the floor.
URL:https://www.narbiltraining.edu.au/event/hltaid009-provide-cardiopulmonary-resuscitation/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260828T070000
DTEND;TZID=Australia/Brisbane:20260828T150000
DTSTAMP:20260503T012424
CREATED:20251209T051013Z
LAST-MODIFIED:20251209T051013Z
UID:740883-1787900400-1787929200@www.narbiltraining.edu.au
SUMMARY:CPCWHS1001 Prepare to work safely in the construction industry
DESCRIPTION:The Queensland GCIT (White Card)\, CPCWHS1001 - Prepare to work safely in the construction industry is a mandatory requirement that provides new and existing workers with the basic understanding and knowledge needed to start or continue work within the building and construction industry.\n\n100 points of identification (ORIGINAL COPIES / CARDS ONLY) is required for this course.\n\nMinimum age is 13 years old.\n\nThe Queensland Construction Induction course is ONLY offered via FACE TO FACE delivery.
URL:https://www.narbiltraining.edu.au/event/cpcwhs1001-prepare-to-work-safely-in-the-construction-industry-3389/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260831T070000
DTEND;TZID=Australia/Brisbane:20260831T133000
DTSTAMP:20260503T012425
CREATED:20251209T050628Z
LAST-MODIFIED:20260502T150812Z
UID:740877-1788159600-1788183000@www.narbiltraining.edu.au
SUMMARY:HLTAID009 & UETDRMP018 CPR\, LVR
DESCRIPTION:
URL:https://www.narbiltraining.edu.au/event/hltaid009-uetdrmp018-cpr-lvr-36/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260831T070000
DTEND;TZID=Australia/Brisbane:20260831T150000
DTSTAMP:20260503T012426
CREATED:20260120T022345Z
LAST-MODIFIED:20260120T022345Z
UID:740959-1788159600-1788188400@www.narbiltraining.edu.au
SUMMARY:RIIWHS204E Work safely at heights
DESCRIPTION:The Work at Heights Certificate (RIIWHS204E - Work safely at heights) fulfills the mandatory training requirement under Workplace Health and Safety Legislation for persons intending to carry out work at height; for example stacking shelves\, working on a roof\, unloading a large truck or accessing silos. Falls can also occur at ground level into holes; for example trenches or service pits.
URL:https://www.narbiltraining.edu.au/event/riiwhs204e-work-safely-at-heights-1209/
LOCATION:Narbil\, Narbil\, Australia
CATEGORIES:Workshop
END:VEVENT
END:VCALENDAR